Small Wi-Fi 6 + BLE 5.3 Combo Module
ME16WS03
ME16WS03-nRF7002+nRF5340
Dual-Core, High-performance, Ultra-low-power, Support AP/STA Mode, Support Wi-Fi 6 Dual-band 2.4G & 5G, Small dimensions
ME16WS03 Wi-Fi 6+BLE Combo Module adopts integrated WLCSP nRF7002 and WLCSP nRF5340 chip, supports BLE mode, at the same time supports Wi-Fi 6 dual-band connection, 2.4G and 5Gfunction, 1T1R. WiFi maximum rate is 86mbps, output power can reach up to 21dBm, receiving current is 56mA in 2.4G band, and 58mA in 5G band. It supports BLE master-slave mode and transparent transmission mode. It adopts independent antenna design for WiFi and BLE, which does not interfere with each other, and the antenna interface is IPEX. One device can support two wireless connection modes, WiFi and BLE.
WiFi BLE Transparent Transmission Module
MS11SF1
MS11SF1-ESP32C3
Support 2.4G Wi-Fi4 （IEEE802.11 b/g/n） , support AP/STA/AP +STA Mode, Tiny size
MS11SF1 is a WIFI + BLE Soc combo module that supports WIFI 4 as well as BLE 5.0. This module supports Wi-Fi4 + BLE 5.0, equipped with RISC-V 32-bit single-core processor, the operating frequency up to 160MHz. MS11SF1 supports the use of AT commands to development, through the serial port to send AT commands to configure the Wi-Fi, BLE, to achieve the function of pass-through.BLE single packet can support up to 514 bytes to be sent, the chip wakes up BLE and BLE and WIFI start at the same time when the chip wakes up, WIFI is STA mode by default and BLE is broadcast mode
WiFi6 + BLE5.3 Combo Module
MS12SF1
MS12SF1-nRF7002+nRF5340
Dual-Core,High-performance,ultra-low-power,Support AP/STA Mode,- Support WiFi6 Dual-band that 2.4G and 5G ,1T1R
MS12SF1 WiFi6+BLE Combo Module adopts integrated nRF7002 and nRF5340 chip, supports BLE mode, at the same time supports WiFi6 dual-band connection, 2.4G and 5G function adopts WiFi and BLE independent antenna design, have no crosstalk between functions. One device can support two wireless connection mode of WiFi and BLE. output Maximum power up to 21dBm, receiving current in 2.4G frequency region is 56mA, while in 5G frequency region is 58mA, meanwhile supports BLE master/slave mode and passthrough mode, adopts WiFi and BLE independent design, no crosstalk.
WiFi AP Module
MS93MFZ
MS93MFZ-MT7628NN
High-performance, multi-interface, high memory, Multiple working modes, AT/STA Firmware, 2x2MIMOFramework
The MS93MFZ is an AP module based on the MT7628NN SoC and includes everything you need to build an AP router.It supports IEEE802.11b/g/n standard and adopts 2x2 MIMO (Multiple input multiple output) Framework, which enables multi- ple transceivers of wireless signals and data transmission rate up to 300Mbps.It is equipped with high performance embed- ded CPU, wireless baseband, RF front-end and various external interfaces. Extended Ethernet, USB, I2C,network, USB, I2C, UART and other interfaces.
